Gunsmith Work

    

 

 

 

Note: Where two prices are shown, the first price is for replacing the part during Premium Action Work. The second price is for replacing just the part and fitting it with no other work being performed. That is for opening the revolver, basic internal cleaning, fitting the part, timing, lubrication and re-assembly.

 

1 Premium Action Work Competition or Target shooting. Corrects all timing issues. Makes the revolver extremely smooth and reliable. In 2016 CSA coined the name Premium Action Work. Since then many companies have copied the name. The work is not the same. See my “Information Overload” page. With or without friction fit cylinder bushing. Certificate on Request 195.00
2 Forcing Cone Improves accuracy. Reduces leading on frame and front of cylinder. 20.00
3 Chamfer Chambers Takes the sharp edge off the chambers for easier loading at speed. 20.00
4 Hone chambers Helps if you have sticky shell ejection problems. 30.00
5 Serrate Front Sight Less reflective. Can add white, gold or red to serrations. 15.00
6 Rebuild Colt Trigger 1st, 2nd or 3rd Gen Colt. TIG welded, heat treated and timed. 150.00
7 Rebuild Colt Hammer Notch 1st, 2nd or 3rd Gen Colt. TIG welded, heat treated and timed.
Add $25 for each additional notch.
175.00
8 Fire Blue Screws Colt – Uberti – Pietta Add $10 each for trigger, base pin and ejector. 60.00
9 Hammer Stop – Adjustable Colt – Uberti – Pietta 75.00
10 Hand Colt – Fit and timed. 90.00 – 120.00
11 Hand Spring Colt – Installed and tuned. 25.00 – 50.00
12 Bolt Colt – Fit and timed. 90.00 – 120.00
13 Trigger Colt – Fit and timed. 60.00 – 85.00
14 3rd Gen Firing Pin Colt – Five pieces. 50.00 – 75.00
15 1st Gen Firing Pin Colt – Two pieces 85.00 – 100.00
16 New 3rd Gen Hammer Colt – Fit and timed with no creep trigger.      240.00
17 Cylinder Bushing – Removable Colt – Information Overload. Link See Section 2, Line 3. 50.00
18 Cylinder Bushing – Short. Early 3rd Gen. Colt – Short bushing pressed in at front of cylinder. 75.00
19 Base Pin Colt 60.00
20 Black Powder Base Pin Screw Colt – Hand-made and custom fit. Photo 65 .00
21 Lengthen Vaquero Firing Pin Ruger – TIG welded 45.00
22 Super Blackhawk Hammer Ruger – Low and wide. 60.00 – 85.00
23 Old Vaquero Hammer Ruger – Same as the New Model Blackhawk and Talo hammer. 60.00 – 85.00
24 Custom Super Blackhawk Hammer Ruger – Low and standard hammer width. Photo 85.00 – 115.00
25 Custom Bisley Hammer Ruger – For Vaquero, New Vaquero, New Model Blackhawk. Photo 85.00 – 115.00
26 Pawl Ruger 15.00 – 40.00
27 Cylinder Stop Ruger 15.00 – 40.00
28 Trigger Ruger 25.00 – 50.00
29 Transfer Bar Ruger 11.00 – 36.00
30 Gate Spring Ruger 9.00 – 34.00
31 Hammer Plunger Ruger 9.00 – 34.00
32 Firing Pin Ruger 35.00
33 Hammer Stop – Adjustable Ruger $90.00 if revolver has the hammer strut lock. 75.00
34 Remove Barrel Stamping Ruger – Photo 75.00
35 Jewel Hammer Add $15 for trigger. 25.00
36 Colt Style Base Pin Ruger – Photo 50.00
37 Colt Style Crescent Ejector Ruger – Photo 45.00
38 Free Spin Pawl Ruger – Custom made using your pawl. On New Vaquero it is free. 75.00
39 Widen Rear Sight Using a DRO mill, not filled. .118 .125 .140 .154 25.00
40

 

Uberti 4 Click Conversion Standard Hammer

Uberti 4 Click Conversion Low Hammer

Replaces retractable firing pin hammer. Trigger set & timed.

Replaces retractable firing pin hammer. Trigger set & timed.

140.00 – 165.00

150.00 – 175.00

41 Stock Hammer Replacement Uberti/Pietta – Fit, with no creep trigger and timed. 140.00/165.00
42 Low Profile Hammer Uberti/Pietta – Fit, with no creep trigger and timed. 150.00/175.00
43 Firing Pin Uberti/Pietta 50.00
44 Harden Firing Pin Uberti/Pietta 50.00
45 Cylinder Bushing – Uberti/Pietta Information Overload. Link See Section 2, Line 3 40.00
46 Hand Uberti/Pietta – Fit and timed. 40.00 – 65.00
47 Hand Spring Uberti/Pietta – Installed and tuned. 20.00 – 40.00
48 Bolt Uberti/Pietta – Fit and timed. 40.00 – 65.00
49 Trigger Uberti/Pietta – Fit and timed. 40.00 – 65.00
50 Harden Grip Frame Screws Uberti/Pietta 50.00
51 1950’s Fast Draw Bolt Modification Information Overload. Link See Section 2, Line 16 40.00 – 65.00
52 Ream Cylinder Chambers For CFDA Ruger – Some 513- XXXX and newer revolvers have shallow chambers. Shells will not go all the way into chambers. 45.00
53 Weld and Re-Shape Front Sight Ruger – Restoring Vaquero sights that have been filed down low. 85.00
54 Deep Clean Firearm Barrel, cylinder and internals. Like new when completed.  75.00
55 Grace SAA Screwdriver Set Photo Bottom of New Firearms page. Edges rounded and polished. 45.00
56 Colt 1800’s Reproduction Screwdriver Photo Bottom of New Firearms page. Hand-made, hardened and tempered. 50.00
57 Lubricating Your Revolver Information Overload Link See Section 2, Line 12  

 

 

Some of the revolvers I work on.

 

American Derringer – American Western Arms – Armi San Marco – Bond Arms – Cimarron – Colt – EIG Euroarms Brescia EMF – Great Western (USA 1950s) – Harrington & Richardson – Hawes/JP Sauer & Sohn – Herter’s

Hopkins & Allen – Hy Hunter – Interarms – J. Stevens Model 41 – Merwin & Hulbert – Pietta – Ruger

Smith & Wesson No. 2 Army – Smith & Wesson Schofield – Standard Manufacturing – STI – Taurus

Uberti – United Sporting Arms – U.S. Firearms

 

Click Here to See Examples of Repair Work

 

Giraffe bone 1